Products may vary per region, please select your territory using the language selection.

Breeze

The Breeze collection is an original Tecma design. Smooth, round lines have been translated in a unique ‘homelike’ shape that combines seating comfort and ergonomics. This collection has been designed to take in consideration of the geometry of more classic Tecma models. This makes the retrofit and the installation in existing bathroom spaces, smooth and easy.

This toilet is well balanced and is equipped with an innovative soft closing system for the cover. The damper mechanism gently controls the closing speed of the cover, thus avoiding possible damage and noise that could disturb a guest’s sleep and comfort. In the event of inspection or maintenance, a special fast removing hinge system, makes the disassemble operation fast and easy.

Download product catalog

General information
Technical information
Documentation
FAQ
Tips

Clean and modern design

Extremely silent operation
Easy and fast installation
Reliable operation
High quality components

Also on board of: Chaparral Boats/ Monterey/ Rizzardi.

Italian Ceramic

Toilet = 59.5 lbs (27 kg)
Bidet = 35.3 lbs (16 kg)

All-in-One

Optional: Premium Plus

Silent flush

Low consumption

0.5-2.7L/0.1-0.7 gal per flush

Optional integrated bidet

Soft closing

How it works the Tecma Macerator System

Tecma Toilets System Set Up

Tecma toilet: how to replace the macerator pump

Specifications

Note: Dimensions in millimeters / inches

Breeze Toilet

Weight	59.5 lbs (27 kg)	Weight	35.3 lbs (16 kg)
Water Usage	0.5-2.7L/0.1-0.7 gal

	Standard	Optional
Color	White
Seat and cover	Thermosetting with soft closing system (Sugatsune damper)	N/A
Outlet pump	MAC 11 212/24 v
Inlet device	Solenoid
Control panel	All-in-One	Touch
Bidet	Matching bidet	Integrated bidet function with side mounted mixer

COMPONENT 1 - Outlet Pump (waste water)

MAC 11 outlet pump macerator turbine	12V dc	24V dc	110-125V ac 60 Hz	220-240V ac 50 Hz or 60 Hz
Fuse recommended	40 A	30 A	8 A	5 A
Pump performance	Max 270 l/min 71.3gm Max vertical head 11mt 36.1ft Max horizontal distance 90 mt 295.3ft
Outlet Duck Bill valve (male)	1,5” / required ID 1,5” (38,5mm)

COMPONENT 2 - Inlet device (clean water)

INLET SOLENOID Centralized system	12V dc	24V dc	110-125V ac 60 Hz	220-240V ac 50 Hz or 60 Hz
Power consumption	9.5W	10W	6W	6W
Working pressure recommended	3 bar	3 bar	3 bar	3 bar
Solenoid Inlet & Outlet (threaded female)	1/2″
Toilet inlet hose fitting (barbed)	1/2″

INLET PUMP single system (raw water)	12V dc	24V dc
Fuse	8A	4A
Pressure	45 PSI – 3 bar
Water flow	12 L/min 3.17 gmp
Toilet inlet hose fitting (barbed)	1/2″

COMPONENT 3 - Control Panel

ALL IN ONE Control panel all-in-one

MULTIFRAME Compatible with all commercial bezels

ARGENT Elegant metal push button

TOUCH Ultimate hi-tech glass touch panel

PREMIUM Patented silicon pad control panel with software	PREMIUM TOUCH Ultimate patented hi-tech glass touch panel with software

Documentation

Thetford Marine Catalog NA 3 MB

Spares Tecma Design/Flexi Line USA 355 KB

How can I replace an obsolete control panel?

The old control panels are no longer available. Use the smart table below as a guideline to choose your control panel.

Obsolete	Suggestion	Note
Multiframe 1P	Multiframe SFT 2P	Same design, better functionality
Argent 1P /Argent 2P/ Touch 1P /2P	Multiframe SFT 2P	Better design, better functionality
Argent 1P /Argent 2P/ Touch 1P /2P	Touch SFT Multifunction	Better design, better functionality
Premium	Touch SFT Multifunction	Better design, same functionality
Premium Plus
Premium Touch

Which spares are suggested on board?

Normally a control panel and a pump are enough. Any case, keeping a kit of rubber hoses too will make it possible to reset a completely toilet. Inlet solenoid is normally a very reliable component.

What kind of tube has to be used?

Tecma macerator pump is able to discharge through any kind of tube (armovir, PVC, safe odor….). Check the diameter. Is it possible to flush into DN32, but this reduced section requires more power. Whenever is possible, use DN40.

Is it possible to use acid or aggressive products for cleaning the toilet?

Plastic and rubber components of the toilet have been tested with several commercial cleaning agents. Normally no problem has been found. Any case, products containing vinegar, acetone, trielina and generic solvents must be avoided, because they can make the rubber fragile. Avoid the usage of products in gel or in foam, because they could close the air vent tube.

Is frequently maintenance needed?

Tecma products do not need a specific maintenance or winterization. Any case, the usage of additives could be helpful (Thetford Tank Freshener) to maintain the discharge pipeline clean. This kind of product helps in avoiding odors and in flushing. It is safe for plastics and tubes. For inlet pump and solenoids, keep the strainers clean.

Is it possible to connect more toilets to the same line?

Yes. In this case a “Y” fitting is needed, in spite of “T” ones, to drive the flow to the tank. Always add a siphon break to prevent siphoning.

Check the video: Tecma toilets system set up – YouTube

Cleaning

Ceramic is suitable for toilet application for the surface high level of hygiene. Use only non abrasive, non-petroleum products to clean the pump. Never use household cleaners,
which can contain bleach. Bleach, strong acid or petroleum-based products can cause irreversible damage to the rubber component of the macerator pump.

Tissue

Tecma is designed to process only toilet paper. Do not use other kind of tissue paper or kitchen paper towel. Thetford’s Aqua-Soft toilet paper is recommended.

Waste

Only human waste and toilet paper should be put in to the toilet. Never flush foreign materials (e.g. paper towels, pre-moistened wipes, condoms, feminine hygene products, dental floss, household garbage, etc.)