Products may vary per region, please select your territory using the language selection.

X-Light

The X-Light collection is an original Tecma design. The units are manufactured using top quality pre-preg carbon fibre for low weight and maximum rigidity. An advanced post cure treatment is applied, to guarantee the best structural integrity and aesthetic. While the basic colour is the black ‘carbon’ look, a large range of other colours is available on request. The marine toilet is specially designed for high performance sailing and motor yachts.

The weight of the bowl is about 4.4 lbs (2 kg), which with the other components, produces a toilet of less than 15.4 lbs. (7 kg) in weight, some 41.9 lbs. (19 kg) lighter than most traditional models. The innovative and easily accessible macerator pump is integrated. Design and production have been exposed to the full rigours of modern thinking. The X-Light bidet provides a mirror image to the matching toilet and its particular symmetry and attractive installation. Pairing units in a bathroom offers attractive symmetry.

General information
Technical information
Documentation
FAQ
Tips

Extreme design, grand-prix performance

Extremely silent operation
Easy and fast installation
Reliable operation
High quality components

Also on board of: Maxi Dolphin.

Full carbon fibre

X-Light toilet = 15.4 lbs (7 kg)
X-Light Short toilet = 14.6 lbs. (6.6 kg)
Bidet = 4.4 lbs (2 kg)

All-in-One

Optional: Premium Plus

Silent flush

Low consumption

17 – 90oz. per flush (0.5 – 2.7 L per flush)

How it works the Tecma Macerator System

Tecma Toilets System Set Up

Specifications

Note: Dimensions in millimeters / inches

X-Light

X-Light Short

Weight	7 kg / 15.4 lbs	Weight	6.6 kg / 14.6 lbs
Water Usage	0.5-2.7 L / 0.1-0.7 gal	Water Usage	0.5-2.7 L / 0.1-0.7 gal

	Standard	Optional
Color	Carbon look	Any color
Seat and cover	Carbon fibre	Any color
Outlet pump	MAC 11 212/24 v
Inlet device	Solenoid
Control panel	All-in-One	Touch

COMPONENT 1 - Outlet Pump (waste water)

MAC 11 outlet pump macerator turbine	12V dc	24V dc	110-125V ac 60 Hz	220-240V ac 50 Hz or 60 Hz
Fuse recommended	40 A	30 A	8 A	5 A
Pump performance	Max 270 l/min 71.3gm Max vertical head 11mt 36.1ft Max horizontal distance 90 mt 295.3ft
Outlet Duck Bill valve (male)	1,5” / required ID 1,5” (38,5mm)

COMPONENT 2 - Inlet device (clean water)

INLET SOLENOID Centralized system	12V dc	24V dc	110-125V ac 60 Hz	220-240V ac 50 Hz or 60 Hz
Power consumption	9.5W	10W	6W	6W
Working pressure recommended	3 bar	3 bar	3 bar	3 bar
Solenoid Inlet & Outlet (threaded female)	1/2″
Toilet inlet hose fitting (barbed)	1/2″

INLET PUMP single system (raw water)	12V dc	24V dc
Fuse	8A	4A
Pressure	45 PSI – 3 bar
Water flow	12 L/min 3.17 gmp
Toilet inlet hose fitting (barbed)	1/2″

COMPONENT 3 - Control Panel

ALL IN ONE Control panel all-in-one

MULTIFRAME Compatible with all commercial bezels

ARGENT Elegant metal push button

TOUCH Ultimate hi-tech glass touch panel

PREMIUM Patented silicon pad control panel with software	PREMIUM TOUCH Ultimate patented hi-tech glass touch panel with software

Documentation

Thetford Marine_Catalog_NorthAmerica 11 MB

Spares Tecma Design Line 151 KB

Installation User Manual Tecma Design Flexi Line 7.5 MB

Which spares are suggested on board?

Normally a control panel and a pump are enough. Any case, keeping a kit of rubber hoses too will make it possible to reset a completely toilet. Inlet solenoid is normally a very reliable component.

What kind of tube has to be used?

Tecma macerator pump is able to discharge through any kind of tube (armovir, PVC, safe odor….). Check the diameter. Is it possible to flush into DN32, but this reduced section requires more power. Whenever is possible, use DN40.

Is it possible to use acid or aggressive products for cleaning the toilet?

Plastic and rubber components of the toilet have been tested with several commercial cleaning agents. Normally no problem has been found. Any case, products containing vinegar, acetone, trielina and generic solvents must be avoided, because they can make the rubber fragile. Avoid the usage of products in gel or in foam, because they could close the air vent tube.

Is frequently maintenance needed?

Tecma products do not need a specific maintenance or winterization. Any case, the usage of additives could be helpful (Thetford Tank Freshener) to maintain the discharge pipeline clean. This kind of product helps in avoiding odors and in flushing. It is safe for plastics and tubes. For inlet pump and solenoids, keep the strainers clean.

Is it possible to connect more toilets to the same line?

Yes. In this case a “Y” fitting is needed, in spite of “T” ones, to drive the flow to the tank. Always add a siphon break to prevent siphoning.

Cleaning

Ceramic is suitable for toilet application for the surface high level of hygiene. Use only non abrasive, non-petroleum products to clean the pump. Never use household cleaners,
which can contain bleach. Bleach, strong acid or petroleum-based products can cause irreversible damage to the rubber component of the macerator pump.

Tissue

Tecma is designed to process only toilet paper. Do not use other kind of tissue paper or kitchen paper towel. Thetford’s Aqua-Soft toilet paper is recommended.

Waste

Only human waste and toilet paper should be put in to the toilet. Never flush foreign materials (e.g. paper towels, pre-moistened wipes, condoms, feminine hygene products, dental floss, household garbage, etc.)

Flushing the toilet – 2 buttons control panel

Press “BEFORE USE” before using the toilet. This will fill the toilet with a small amount of water. Press “AFTER USE” after using the toilet. This will start the flushing cycle: At the end of the cycle the toilet will remain empty. The amount of clean water used for the flushing can be adjusted. Recommended water level is 1 cm above ceramic discharge hole.

Flushing the toilet – 1 button control panel

After pressing the button, the flushing cycle will start automatically. At the end of the cycle the toilet will be refilled with a small amount of water ready for next use.The amount of clean water used for the flushing can be adjusted. Recommended water level is 1 cm above ceramic discharge hole.