Products may vary per region, please select your territory using the language selection.

Silence Plus 2G Short

The Silence Plus 2G Short is the short version of the Silence Plus 2G, the ‘big bowl’ model of the Flexi-Line. The short model is designed to be installed on a raising step, usually 10 cm/ 3,9 inches high. For this purpose the height of the ceramic shell is reduced to 36 cm/ 14,2 inches to compensate and match the standard seating height of 46 cm/ 18,1 inches.

Flexi 1G produced up to 2016. The former models will remain available, upon request, for replacement. Spares will also remain available for the coming 10 years. Please contact us.

Download product catalog

General information
Technical information
Documentation
FAQ
Tips

Italian ceramic

Big bowl

Improved 2nd Generation System

How it works the Tecma Macerator System

Tecma Toilets System Set Up

Tecma toilet: how to replace the macerator pump

Specifications

Note: Dimensions in millimeters / inches

Weight	23,5 kg/ 51,8 lb	Weight	14 kg/ 30,9 lb
Water Usage	0,5-2,7 L/ 0,1-0,7 gal per flush

	Standard	Optional
Color	White	Bone
Seat and cover	Polyester
Outlet pump	MAC 11 12/24v
Inlet device	Solenoid	Inlet pump
Control panel	All-in one / Multiframe / Argent / Touch / Premium Touch / Premium

COMPONENT 1 - Outlet Pump (waste water)

Italian ceramic toilet complete of seat and cover, integrated macerator pump for waste pump out and discharge hose system with air admittance valve (NEW)

MAC 11 outlet pump macerator turbine	12V dc	24V dc	110-125V ac 60 Hz	220-240V ac 50 Hz or 60 Hz
Fuse recommended	40 A	30 A	8 A	5 A
Pump performance	Max 270 l/min 71.3gm Max vertical head 11mt 36.1ft Max horizontal distance 90 mt 295.3ft
Outlet Duck Bill valve (male)	1,5″ / required ID 1,5″ (38,5mm)

COMPONENT 2 - Inlet device (clean water)

INLET SOLENOID Centralized system	12V dc	24V dc	110-125V ac 60 Hz	220-240V ac 50 Hz or 60 Hz
Power consumption	9.5 W	10 W	6 W	6 W
Working pressure recommended	3 bar	3 bar	3 bar	3 bar
Solenoid Inlet & Outlet (threaded female)	1/2″
Toilet inlet hose fitting (barbed)	1/2″

INLET PUMP single system (raw water)	12V dc	24V dc
Fuse	8A	4A
Pressure	45 PSI – 3 bar
Water flow	12 L/min 3.17 gmp
Toilet inlet hose fitting (barbed)	1/2″

COMPONENT 3 - Control Panel

STANDARD All-in-One control panel

Documentation

Flexi 2G Seat & Cover options 3.8 MB
Thetford Marine Catalog USA 5 MB

Spares Tecma Design/Flexi Line USA 355 KB

How can I replace an obsolete control panel?

The old control panels are no longer available. Use the smart table below as a guideline to choose your control panel.

Obsolete	Suggestion	Note
Multiframe 1P	Multiframe SFT 2P	Same design, better functionality
Argent 1P /Argent 2P/ Touch 1P /2P	Multiframe SFT 2P	Better design, better functionality
Argent 1P /Argent 2P/ Touch 1P /2P	Touch SFT Multifunction	Better design, better functionality
Premium	Touch SFT Multifunction	Better design, same functionality
Premium Plus
Premium Touch

Will the Bidet line of previous Flexi line be discontinued?

Yes, but in addition there will be available perfect matching bidets for Silence Plus 2G, Silence Plus 2G Short, Silence 2G and Silence 2G Short. This will even further improve any bathroom design.

How long will the older Flexi models remain available?

Flexi line models (including Saninautico, Prestige, Bidet line (Bidet, Bidet Mini, Bidet Short) will be phased out as standard products during 2016- 2017.

How long will the old Flexi Line spare parts remain available?

Most Flexi Line spares remain valid as either still used on the Design Line models (e.g. discharge hoses) or compatible with new Flexi 2G line. Spare parts will remain available for 10 years.

Do you have installation instructions that highlight the difference?

Yes, the installation manual has recommendations about the new floor fixation system and syphon break installations.

Is the new Flexi 2G floor fixation system compatible with previous Flexi Line models?

No, the bracket floor fixation on the new Flexi 2G facilitates an easy installation of the new different designs. The kit used is in common with the already existing Design line.

Do I have to make changes before installation in case of refit?

The footprint is the same, so no change required (within ceramic production material tolerances).

Do the new Flexi 2G line (Silence Plus 2G/Silence 2G) internal hoses possibly fit with previously installed Flexi line?

No. It’s not possible to replace them on the the old Flexi line models.

What is the difference between the Flexi Line toilets and the 10 new Flexi 2G models?

New design
Matching bidet
Short version hardware integration
Internal discharge hose system
Easy floor fixation
Internal syphon venting through integrated Air admittance valve

What remained the same between the Flexi and the new Flexi 2G models?

Same silence and proven quality of current Tecma Flexi line toilets
Same footprint
Same outer dimensions
Same reliable strong macerator technology
Same fresh or raw water optional systems
Same control panel options
Same seat and cover options
Same warranty

Availability

Specification changes and replacement

Cleaning

Ceramic is suitable for toilet application for the surface high level of hygiene. Use only non abrasive, non-petroleum products to clean the pump. Never use household cleaners,
which can contain bleach. Bleach, strong acid or petroleum-based products can cause irreversible damage to the rubber component of the macerator pump.

Tissue

Tecma is designed to process only toilet paper. Do not use other kind of tissue paper or kitchen paper towel. Thetford’s Aqua-Soft toilet paper is recommended.

Waste

Only human waste and toilet paper should be put in to the toilet. Never flush foreign materials (e.g. paper towels, pre-moistened wipes, condoms, feminine hygene products, dental floss, household garbage, etc.)