Products may vary per region, please select your territory using the language selection.

Compass

The narrow footprint and smart back of the Compass toilet gives maximum space and maximum flexibility wherever it is installed on board. It can go straight to wall or even further towards the hull thanks to the cut away. The Compass is not limited by a vertical back. In this way the visual installation remains perfect, whatever installation space you have. The small footprint and the hose design facilitate a very easy installation. The discharge pipes can easily be connected either below the step or surface mounted in all directions. By having both a high and a short profile, the Compass range offers the maximum flexibility on board.

The performance of the macerator pump meets all quality standards, while the technology inside the toilet has been further developed to keep the sound emission to the lowest level possible, while limiting the water and electrical consumption to minimal levels. The installation, plumbing and wiring is easy and fast, with virtually no maintenance.

Both Compass High and Short version are equipped with an innovative soft closing system. A gentle finger touch to the lid activates the soft-close damper mechanism which controls the closing speed of the cover. In addition to user convenience, a slow-closing lid keeps noise to a minimum and prevents potential damage to the toilet seat.

The softclose damper mechanism is a design original to Tecma.

General information
Technical information
Documentation
FAQ
Tips

Also on board of: Aviara, Cigarette, Blackfin, Sabre.

Italian Ceramic

Compass Short = 40.0 lbs (19.5 kg)

Eco

Optional: Premium Plus

Silent flush

Low consumption

0.1-0.7 gal per flush (0.5 – 2 L)

Soft Closing

How it works the Tecma Macerator System

Tecma Toilets System Set Up

Specifications

Note: Dimensions in millimeters / inches

TOILET Compass High

Weight	21.5 kg (47.3 lbs)
Water Usage	0.5 / 2 L (0.1-0.5 gal)

	Standard	Optional
Color	White	N/A
Seat and cover	Thermosetting with soft closing system	N/A
Outlet pump	MAC 4 12/24 V	N/A
Inlet device	Solenoid	Inlet pump
Control panel	Eco rocker switch	Premium Plus

TOILET Compass Short

Weight	40.0 lbs (19,5 kg)
Water Usage	0.1-0.7 gal (0.5 / 2.7 L)

	Standard	Optional
Color	White	N/A
Seat and cover	Thermosetting soft closing	N/A
Outlet pump	MAC 4 12/24v	N/A
Inlet device	Solenoid	Inlet pump
Control panel	Eco rocker switch	Premium Plus

COMPONENT 1 - Outlet Pump (waste water)

MAC 4 outlet pump macerator turbine	12V dc	24V dc
Fuse recommended	30 A	20 A
Pump performance	Max vertical head 4 mt 13.1ft Max horizontal distance 40mt 131.2ft
Outlet Duck Bill valve (male)	1.5″/required ID 1.5″ (38.5mm)
Nozzle Inlet fitting (barbed)	1/4″

Tech Graph 2

COMPONENT 2 - Inlet device (clean water)

INLET SOLENOID Centralized system	12V dc	24V dc	110-125V ac 60 Hz	220-240V ac 50 Hz or 60 Hz
Power consumption	9.5 W	10 W	6 W	6 W
Working pressure reccomended	3 bar	3 bar	3 bar	3 bar
Solenoid inlet (threaded male)	1/2″/ required female threaded 1/2″
Solenoid outlet (barbed male)	1/4″
Toilet inlet hose fitting (barbed)	1/2″

INLET PUMP single system (raw water)	12V dc	24V dc
Fuse	8 A	4 A
Pressure	45 PSI – 3 bar
Water flow	12L/min 3.17 gmp
Toilet inlet hose fitting (barbed)	1/2″

COMPONENT 3 - Control Panel

Eco rocker switch Ultra effective rocker switch

Premium Plus Patented silicon pad control panel with software and tank monitoring system

Documentation

Compass leaflet 4.5 MB
Thetford Marine_Catalog_NorthAmerica 11 MB

Spares Tecma Compact Line 315.3 KB

Which spares are suggested on board?

Normally a control panel and a pump are enough. Any case, keeping a kit of rubber hoses too will make it possible to reset a completely toilet. Inlet solenoid is normally a very reliable component.

What kind of tube has to be used?

Tecma macerator pump is able to discharge through any kind of tube (armovir, PVC, safe odor….). Check the diameter. Is it possible to flush into DN32, but this reduced section requires more power. Whenever is possible, use DN40.

Is it possible to use acid or aggressive products for cleaning the toilet?

Plastic and rubber components of the toilet have been tested with several commercial cleaning agents. Normally no problem has been found. Any case, products containing vinegar, acetone, trielina and generic solvents must be avoided, because they can make the rubber fragile. Avoid the usage of products in gel or in foam, because they could close the air vent tube.

Is frequently maintenance needed?

Tecma products do not need a specific maintenance or winterization. Any case, the usage of additives could be helpful (Thetford Tank Freshener) to maintain the discharge pipeline clean. This kind of product helps in avoiding odors and in flushing. It is safe for plastics and tubes. For inlet pump and solenoids, keep the strainers clean.

Is it possible to connect more toilets to the same line?

Yes. In this case a “Y” fitting is needed, in spite of “T” ones, to drive the flow to the tank. Always add a siphon break to prevent siphoning.

Cleaning

Ceramic is suitable for toilet application for the surface high level of hygiene. Use only non abrasive, non-petroleum products to clean the pump. Never use household cleaners,
which can contain bleach. Bleach, strong acid or petroleum-based products can cause irreversible damage to the rubber component of the macerator pump.

Tissue

Tecma is designed to process only toilet paper. Do not use other kind of tissue paper or kitchen paper towel. Thetford’s Aqua-Soft toilet paper is recommended.

Waste

Only human waste and toilet paper should be put in to the toilet. Never flush foreign materials (e.g. paper towels, pre-moistened wipes, condoms, feminine hygene products, dental floss, household garbage, etc.)

Flushing the toilet – 2 buttons control panel

Press “BEFORE USE” before using the toilet. This will fill the toilet with a small amount of water. Press “AFTER USE” after using the toilet. This will start the flushing cycle: At the end of the cycle the toilet will remain empty. The amount of clean water used for the flushing can be adjusted. Recommended water level is 1 cm above ceramic discharge hole.

Flushing the toilet – 1 button control panel

After pressing the button, the flushing cycle will start automatically. At the end of the cycle the toilet will be refilled with a small amount of water ready for next use.The amount of clean water used for the flushing can be adjusted. Recommended water level is 1 cm above ceramic discharge hole.