A new design of the wall-mounted Evolution toilet and bidet with the same proven concept as the Tecma Evolution. The ceramics have an updated sleek design. The wall-mounted toilet and bidet not only give a spacious and luxury look to the bathroom, they also save floor space and offer maximum hygiene and cleaning practicality. The new Evolution is equipped with the improved 2nd Generation System which means an optimized hose system. A safe air admittance valve is integrated to prevent syphoning, backflows and installation constraints. Evolution is equipped with an innovative soft closing system for the cover. The damper mechanism gently controls the closing speed of the cover, thus avoiding possible damage and noise that could disturb a guest’s sleep and comfort. The Evolution bidet provides a mirror image to the matching toilet and its particular symmetry and attractive installation.
Download product catalogAdvanced ‘wall hung’ solution
- Extremely silent operation
- Easy and fast installation
- Reliable operation
- High quality components
Also on board of: Acico Yacht, Linssen Yacht, Royal Huisman.
 |
Italian Ceramic |  |
Toilet = 27 kg (59.5 lbs) Bidet = 22 kg (48.5 lbs) |
 |
Wide range of control panels |
 |
Silent flush |  |
Low consumption |  |
0.5-2.7L/0.1-0.7 gal per flush |
 |
Optional integrated bidet |  |
Soft closing |
How it works the Tecma Macerator System
Tecma Toilets System Set Up
Tecma toilet: how to replace the macerator pump
Specifications
Contact us for 2d or 3d files.
Note: Dimensions in millimeters / inches
TOILET
BIDET
| Weight | 27 kg (59.5 lbs) | Weight | 22 kg (48.5 lbs) |
| Water Usage | 0.5-2.7L/0.1-0.7 gal |
| Standard | Optional | |
| Color | White | |
| Seat and cover | Thermosetting with soft closing system | |
| Outlet pump | MAC 11 12/24v | MAC 11 110/230 v |
| Inlet device | Solenoid | Inlet pump |
| Control panel | All-in-One SFT | Multiframe SFT / Touch SFT Multifunction |
| Bidet | Matching Bidet | Integrated bidet function with wall mounted mixer |
*the control panel is sold separately and not included in the box
COMPONENT 1 - Outlet Pump (waste water)
 MAC 11outlet pump macerator turbine |
12V dc | 24V dc | 110-125V ac 60 Hz |
220-240V ac 50 Hz or 60 Hz |
| Fuse recommended | 40 A | 30 A | 8 A | 5 A |
| Pump performance | Max 270 l/min 71.3gm Max vertical head 11mt 36.1ft Max horizontal distance 90 mt 295.3ft |
|||
| Outlet Duck Bill valve (male) | 1,5″ / required ID 1,5″ (38,5mm) | |||
COMPONENT 2 - Inlet device (clean water)
 INLET SOLENOIDCentralized system |
12V dc | 24V dc | 110-125V ac 60 Hz |
220-240V ac 50 Hz or 60 Hz |
| Power consumption | 9.5 W | 10 W | 6 W | 6 W |
| Working pressure recommended | 3 bar | 3 bar | 3 bar | 3 bar |
| Solenoid Inlet & Outlet (threaded female) | 1/2″ | |||
| Toilet inlet hose fitting (barbed) | 1/2″ | |||
 INLET PUMPsingle system (raw water) |
12V dc | 24V dc |
| Fuse | 8A | 4A |
| Pressure | 45 PSI – 3 bar | |
| Water flow | 12 L/min 3.17 gmp | |
| Toilet inlet hose fitting (barbed) | 1/2″ | |
COMPONENT 3 - Control Panel
| STANDARD Control panel All-in-one SFT |
||
 |
||
| MULTIFRAME SFT Compatible with all commercial bezels |
||
 |
||
| TOUCH SFT MULTIFUNCTION Ultimate Hi-tech glass touch panel |
||
 |
||
How can I replace an obsolete control panel?
The old control panels are no longer available. Use the smart table below as a guideline to choose your control panel.
|
Obsolete |
Suggestion | Note |
| Multiframe 1P | Multiframe SFT 2P | Same design, better functionality |
| Argent 1P /Argent 2P/
Touch 1P /2P |
Multiframe SFT 2P | Better design, better functionality |
| Touch SFT Multifunction | Better design, better functionality | |
| Premium | Touch SFT Multifunction |
Better design, same functionality |
| Premium Plus | ||
| Premium Touch |
Contact us for further informations.
Which spares are suggested on board?
Normally a control panel and a pump are enough. Any case, keeping a kit of rubber hoses too will make it possible to reset a completely toilet. Inlet solenoid is normally a very reliable component.
What kind of tube has to be used?
Tecma macerator pump is able to discharge through any kind of tube (armovir, PVC, safe odor….). Check the diameter. Is it possible to flush into DN32, but this reduced section requires more power. Whenever is possible, use DN40.
Is it possible to use acid or aggressive products for cleaning the toilet?
Plastic and rubber components of the toilet have been tested with several commercial cleaning agents. Normally no problem has been found. Any case, products containing vinegar, acetone, trielina and generic solvents must be avoided, because they can make the rubber fragile. Avoid the usage of products in gel or in foam, because they could close the air vent tube.
Is frequently maintenance needed?
Tecma products do not need a specific maintenance or winterization. Any case, the usage of additives could be helpful (Thetford Tank Freshener) to maintain the discharge pipeline clean. This kind of product helps in avoiding odors and in flushing. It is safe for plastics and tubes. For inlet pump and solenoids, keep the strainers clean.
Is it possible to connect more toilets to the same line?
Yes. In this case a “Y” fitting is needed, in spite of “T” ones, to drive the flow to the tank. Always add a siphon break to prevent siphoning.
Check the video: Tecma toilets system set up – YouTube
How to choose the proper control panel
The old control panels are no longer available. Use the smart table below as a guideline to choose your control panel.
|
Obsolete |
Suggestion | Note |
| Multiframe 1P | Multiframe SFT 2P | Same design, better functionality |
| Argent 1P /Argent 2P/
Touch 1P /2P |
Multiframe SFT 2P | Better design, better functionality |
| Touch SFT Multifunction | Better design, better functionality | |
| Premium | Touch SFT Multifunction |
Better design, same functionality |
| Premium Plus | ||
| Premium Touch |
Contact us for further informations.
How to keep your toilet clean
Thetford offers a pleasantly-scented toilet fluid for the flush-water tank and a variety of waste-holding tank products. Aqua Rinse keeps the flush water fresh, ensures a smooth flush and leaves a protective layer. All products for the waste-holding tank suppress unpleasant odours, stimulate the breakdown of waste, reduce the formation of gas, protect moving parts and help keep your waste-holding tank fresh and clean. For the differences between the distinguishing qualities of each waste-holding tank product go to Products/Care, cleaning & maintenance on this website.
Cleaning
Ceramic is suitable for toilet application for the surface high level of hygiene. Use only non abrasive, non-petroleum products to clean the pump. Never use household cleaners,
which can contain bleach. Bleach, strong acid or petroleum-based products can cause irreversible damage to the rubber component of the macerator pump.
Tissue
Tecma is designed to process only toilet paper. Do not use other kind of tissue paper or kitchen paper towel. Thetford’s Aqua-Soft toilet paper is recommended.
Waste
Only human waste and toilet paper should be put in to the toilet. Never flush foreign materials (e.g. paper towels, pre-moistened wipes, condoms, feminine hygene products, dental floss, household garbage, etc.)
Bad odors
If you have bad odours, be sure the smell is really coming out from the toilet. Sometimes the hot environment and the absence of usage could cause the drying of the water in the siphons of shower and sink (smaller than the toilet one). The siphon are used as “water traps”. Once they are dry, a direct connection for the air from the sewage and the bathroom is created. Then you have the bad odor. If the odor is from the toilet it means there is direct connection with the tank. Check that the system is designed properly and that, after use, the toilet remains isolated from the tank with a water trap.
© 2025 All rights reserved