Products may vary per region, please select your territory using the language selection.

Elegance 2G Cut

Designed to match with the angled back walls

The Elegance 2G is the ‘small bowl’ design of the Flexi Line. To optimize the space in your bathroom with an angled back wall and keep the same design as everywhere on board, the Elegance 2G Cut and the Short version were designed. This is the perfect solution to adapt the toilet to the hull flare. To optimize the layout there is also a short version available to install on a step, the Elegance 2G Cut Short.

The Elegance 2G Cut and Elegance 2G Cut Short are also equipped with the new second Generation System Improvements to give you the best your yacht deserves.

Flexi 1G produced up to 2016. The former models will remain available, upon request, for replacement. Spares will also remain available for the coming 10 years. Please contact us.

General information
Technical information
Documentation
FAQ

Italian ceramic

Small bowl

Improved 2nd Generation System

How it works the Tecma Macerator System

Tecma Toilets system Set Up

Specifications

Note: Dimensions in millimeters / inches

Weight	22 kg/ 48,5 lb	Weight	19 kg/ 41,8 lb
Water Usage	0,5-2,7 L/ 0,1-0,7 gal per flush	Water Usage	0,5-2,7 L/ 0,1-0,7 gal per flush

	Standard	Optional
Color	White	Bone/black
Seat and cover	Polyester coated wood	Polyester coated wood with soft closing: white, Polyester coated wood: black, Thermosetting with soft closing: white, Thermosetting: white/ bone
Outlet pump	MAC 11 12/24v	N/A
Inlet device	Solenoid	Solenoid
Control panel	All-in-one	Multiframe, Argent, Touch, Premium, Premium Touch
Matching bidet	Bidet Silence Plus 2G
Toilet optional	Silence Plus 2G

COMPONENT 1 - Outlet Pump (waste water)

Italian ceramic toilet complete of seat and cover, integrated macerator pump for waste pump out and discharge hose system with air admittance valve (NEW)

MAC 11 outlet pump macerator turbine	12V dc	24V dc	110-125V ac 60 Hz	220-240V ac 50 Hz or 60 Hz
Fuse recommended	40 A	30 A	8 A	5 A
Pump performance	Max 270 l/min 71.3gm Max vertical head 11mt 36.1ft Max horizontal distance 90 mt 295.3ft
Outlet Duck Bill valve (male)	1,5″ / required ID 1,5″ (38,5mm)

COMPONENT 2 - Inlet device (clean water)

INLET SOLENOID Centralized system	12V dc	24V dc	110-125V ac 60 Hz	220-240V ac 50 Hz or 60 Hz
Power consumption	9.5 W	10 W	6 W	6 W
Working pressure recommended	3 bar	3 bar	3 bar	3 bar
Solenoid Inlet & Outlet (threaded female)	1/2″
Toilet inlet hose fitting (barbed)	1/2″

INLET PUMP single system (raw water)	12V dc	24V dc
Fuse	8A	4A
Pressure	45 PSI – 3 bar
Water flow	12 L/min 3.17 gmp
Toilet inlet hose fitting (barbed)	1/2″

COMPONENT 3 - Control Panel

STANDARD Control panel all-in-one

MULTIFRAME Compatible with all commercial bezels

ARGENT Elegant metal push button

TOUCH Ultimate hi-tech glass touch panel

PREMIUM Patented silicon pad control panel with software	PREMIUM TOUCH Ultimate patented hi-tech glass touch panel with software

Documentation

Thetford Marine Catalog International 11 MB

Spares Tecma Design Flexi Line 1.2 MB

Installation User Manual Tecma Design Flexi Line 6.7 MB

Will the Bidet line of previous Flexi line be discontinued?

Yes, but in addition there will be available perfect matching bidets for Silence Plus 2G, Silence Plus 2G Short, Elegance 2G and Elegance 2G Short. This will even further improve any bathroom design.

How long will the older Flexi models remain available?

Flexi line models (including Saninautico, Prestige, Bidet line (Bidet, Bidet Mini, Bidet Short) will be phased out as standard products during 2016- 2017.

How long will the old Flexi Line spare parts remain available?

Most Flexi Line spares remain valid as either still used on the Design Line models (e.g. discharge hoses) or compatible with new Flexi 2G line. Spare parts will remain available for 10 years.

Do you have installation instructions that highlight the difference?

Yes, the installation manual has recommendations about the new floor fixation system and syphon break installations.

Is the new Flexi 2G floor fixation system compatible with previous Flexi Line models?

No, the bracket floor fixation on the new Flexi 2G facilitates an easy installation of the new different designs. The kit used is in common with the already existing Design line.

Do I have to make changes before installation in case of refit?

The footprint is the same, so no change required (within ceramic production material tolerances).

Do the new Flexi 2G line (Silence Plus 2G/Elegance 2G) internal hoses possibly fit with previously installed Flexi line?

No. It’s not possible to replace them on the the old Flexi line models.

What is the difference between the Flexi Line toilets and the 10 new Flexi 2G models?

New design
Matching bidet
Short version hardware integration
Internal discharge hose system
Easy floor fixation
Internal syphon venting through integrated Air admittance valve

What remained the same between the Flexi and the new Flexi 2G models?

Same silence and proven quality of current Tecma Flexi line toilets
Same footprint
Same outer dimensions
Same reliable strong macerator technology
Same fresh or raw water optional systems
Same control panel options
Same seat and cover options
Same warranty

Search