Products may vary per region, please select your territory using the language selection.

X-Light

The X-Light collection is an original Tecma design. The units are manufactured using top quality pre-preg carbon fibre for low weight and maximum rigidity. An advanced post cure treatment is applied, to guarantee the best structural integrity and aesthetic. While the basic colour is the black ‘carbon’ look, a large range of other colours is available on request. The marine toilet is specially designed for high performance sailing and motor yachts.

The weight of the bowl is about 2 kg, which with the other components, produces a toilet of less than 7 kg in weight, some 19 kg lighter than most traditional models. The innovative and easily accessible macerator pump is integrated. Design and production have been exposed to the full rigours of modern thinking. The X-Light bidet provides a mirror image to the matching toilet and its particular symmetry and attractive installation. Pairing units in a bathroom offers attractive symmetry.

Download product catalog

General information
Technical information
Documentation
FAQ
Tips

Extreme design, grand-prix performance

Extremely silent operation
Easy and fast installation
Reliable operation
High quality components

Also on board of: Wally, Baltic Yachts, Nautor Swan

	Full carbon fibre		X-Light toilet = 7 kg X-Light Short = 6,6 kg Bidet = 2 kg		Wide range of control panels
	Silent flush		Low consumption		0.5 – 2.7 L per flush (17 – 90oz. per flush)

How it works the Tecma Macerator System

Tecma Toilets System Set Up

Tecma toilet: how to replace the macerator pump

Specifications

Note: Dimensions in millimeters / inches

Weight	7 kg / 15.4 lbs	Weight	6.6 kg / 14.6 lbs.
Water Usage	0.5-2.7 L / 0.1-0.7 gal	Water Usage	0.5-2.7 L / 0.1-0.7 gal

X-Light Bidet

Weight

2 kg / 4.4 lbs

	Standard	Optional
Color	Carbon look	Any color
Seat and cover	Carbon fibre	Any color
Outlet pump	MAC 11 24v	MAC11 12v or 230 v
Inlet device	Solenoid	Inlet pump
Control panel	All-in-One SFT	Multiframe SFT / Touch SFT Multifunction
Bidet	Matching Bidet

COMPONENT 1 - Outlet Pump (waste water)

MAC 11 outlet pump macerator turbine	12V dc	24V dc	110-125V ac 60 Hz	220-240V ac 50 Hz or 60 Hz
Fuse recommended	40 A	30 A	8 A	5 A
Pump performance	Max 270 l/min 71.3gm Max vertical head 11mt 36.1ft Max horizontal distance 90 mt 295.3ft
Outlet Duck Bill valve (male)	1,5″ / required ID 1,5″ (38,5mm)

COMPONENT 2 - Inlet device (clean water)

INLET SOLENOID Centralized system	12V dc	24V dc	110-125V ac 60 Hz	220-240V ac 50 Hz or 60 Hz
Power consumption	9.5 W	10 W	6 W	6 W
Working pressure recommended	3 bar	3 bar	3 bar	3 bar
Solenoid Inlet & Outlet (threaded female)	1/2″
Toilet inlet hose fitting (barbed)	1/2″

INLET PUMP single system (raw water)	12V dc	24V dc
Fuse	8A	4A
Pressure	45 PSI – 3 bar
Water flow	12 L/min 3.17 gmp
Toilet inlet hose fitting (barbed)	1/2″

COMPONENT 3 - Control Panel

STANDARD Control panel All-in-one SFT

MULTIFRAME SFT Compatible with all commercial bezels

TOUCH SFT MULTIFUNCTION Ultimate Hi-tech glass touch panel

Documentation

Thetford Marine Catalog International 12 MB

Spares Tecma Design/Flexi Line from 2020 280 KB

How can I replace an obsolete control panel?

The old control panels are no longer available. Use the smart table below as a guideline to choose your control panel.

Obsolete	Suggestion	Note
Multiframe 1P	Multiframe SFT 2P	Same design, better functionality
Argent 1P /Argent 2P/ Touch 1P /2P	Multiframe SFT 2P	Better design, better functionality
Argent 1P /Argent 2P/ Touch 1P /2P	Touch SFT Multifunction	Better design, better functionality
Premium	Touch SFT Multifunction	Better design, same functionality
Premium Plus
Premium Touch

Which spares are suggested on board?

Normally a control panel and a pump are enough. Any case, keeping a kit of rubber hoses too will make it possible to reset a completely toilet. Inlet solenoid is normally a very reliable component.

What kind of tube has to be used?

Tecma macerator pump is able to discharge through any kind of tube (armovir, PVC, safe odor….). Check the diameter. Is it possible to flush into DN32, but this reduced section requires more power. Whenever is possible, use DN40.

Is it possible to use acid or aggressive products for cleaning the toilet?

Plastic and rubber components of the toilet have been tested with several commercial cleaning agents. Normally no problem has been found. Any case, products containing vinegar, acetone, trielina and generic solvents must be avoided, because they can make the rubber fragile. Avoid the usage of products in gel or in foam, because they could close the air vent tube.

Is frequently maintenance needed?

Tecma products do not need a specific maintenance or winterization. Any case, the usage of additives could be helpful (Thetford Tank Freshener) to maintain the discharge pipeline clean. This kind of product helps in avoiding odors and in flushing. It is safe for plastics and tubes. For inlet pump and solenoids, keep the strainers clean.

How to choose the proper control panel

The old control panels are no longer available. Use the smart table below as a guideline to choose your control panel.

Obsolete	Suggestion	Note
Multiframe 1P	Multiframe SFT 2P	Same design, better functionality
Argent 1P /Argent 2P/ Touch 1P /2P	Multiframe SFT 2P	Better design, better functionality
Argent 1P /Argent 2P/ Touch 1P /2P	Touch SFT Multifunction	Better design, better functionality
Premium	Touch SFT Multifunction	Better design, same functionality
Premium Plus
Premium Touch

Cleaning

Ceramic is suitable for toilet application for the surface high level of hygiene. Use only non abrasive, non-petroleum products to clean the pump. Never use household cleaners,
which can contain bleach. Bleach, strong acid or petroleum-based products can cause irreversible damage to the rubber component of the macerator pump.

Tissue

Tecma is designed to process only toilet paper. Do not use other kind of tissue paper or kitchen paper towel. Thetford’s Aqua-Soft toilet paper is recommended.

Waste

Only human waste and toilet paper should be put in to the toilet. Never flush foreign materials (e.g. paper towels, pre-moistened wipes, condoms, feminine hygene products, dental floss, household garbage, etc.)

Bad odors

If you have bad odours, be sure the smell is really coming out from the toilet. Sometimes the hot environment and the absence of usage could cause the drying of the water in the siphons of shower and sink (smaller than the toilet one). The siphon are used as “water traps”. Once they are dry, a direct connection for the air from the sewage and the bathroom is created. Then you have the bad odor. If the odor is from the toilet it means there is direct connection with the tank. Check that the system is designed properly and that, after use, the toilet remains isolated from the tank with a water trap.

Extreme design, grand-prix performance

Specifications

COMPONENT 1 - Outlet Pump (waste water)

COMPONENT 2 - Inlet device (clean water)

COMPONENT 3 - Control Panel

Documentation

How can I replace an obsolete control panel?

Which spares are suggested on board?

What kind of tube has to be used?

Is it possible to use acid or aggressive products for cleaning the toilet?

Is frequently maintenance needed?

How to choose the proper control panel

Cleaning

Tissue

Waste

Bad odors

Accessories

Related products